Home / Products / Permanent Base Davit Fall Protection System
Davit System Permanent Base
Image of the Permanent Davit Graphic
Image of the Davit and Hoist
Image of the Davit Offset Arm
Image of the Davit Offset Arm
Image of the Davit System

Permanent Base Davit Fall Protection System

Fall Protection

The Pelsue Davit System is extremely versatile and can be used for both fall protection and rescue & retrieval. The system includes a universal bracket for the mounting of a hoist, standard SRL, or 3-Way SRL, and offers an additional mounting location for using two systems.

All Pelsue Davit Systems are built from structural aluminum, allowing for lightweight and portable use. They are also specially engineered to be fully set up in about 5 minutes. The Pelsue Davit System is proudly made in America with the highest quality materials to ensure the system will provide you years of service.

All Pelsue Davit Systems are man rated to 310 lbs.

read more

Choose Model

Choose model then select accessories to include them into your quote

DK1824

DK1824 Davit Mast – includes center post, elbow, and 18″/24″ offset arm (base and hoist sold separately)

Add to Quote
DK3036

DK3036 Davit Mast – includes center post, elbow, and 30″/36″ offset arm (base and hoist sold separately)

Add to Quote
DK4248

DK4248 Davit Mast – includes center post, elbow, and 42″/48″ offset arm (base and hoist sold separately)

Add to Quote
Finalize QuoteView Accessories

LIGHTWEIGHT

TWO HOIST/SRL MOUNTING LOCATIONS

EASY SET-UP

 

COMPATIBLE MOUNT SLEEVES/BASES

Permanent Mount Sleeves:

DSP-F1 – Floor Mounted: Coated Steel

DSS-F1 – Floor Mounted: Stainless Steel

DSG-F1 – Floor Mounted: Galvanized Steel

DSP-F2 – Center Floor Mounted: Coated Steel

DSS-F2 – Center Floor Mounted: Stainless Steel

DSG-F2 – Center Floor Mounted: Galvanized Steel

DSP-W1 – Wall Mounted: Coated Steel

DSS-W1 – Wall Mounted: Stainless Steel

DSG-W1 – Wall Mounted: Galvanized Steel

DSP-A1 – Inside Corner Mounted: Coated Steel

DSP-A2 – Outside Corner Mounted: Coated Steel

DSP-C2 – Cylinder Core: Coated Steel

DSS-C2 – Cylinder Core: Stainless Steel

DSP-C1 – Flush Floor Mounted (Fresh Pour Concrete): Coated Steel

DSS-C1 – Flush Floor Mounted (Fresh Pour Concrete): Stainless Steel

DSP-F3 – Flush Floor Mounted (Existing Concrete): Coated Steel

DSS-F3 – Flush Floor Mounted (Existing Concrete): Stainless Steel

Portable Wall Mounted Bases

DSR-S03 – Portable Wall Mount: Zinc Plated Carbon Steel

DSR-A08 – Clamping Portable Wall Mount: Yellow Powder Coated

DSR-ADJ – Adjustable Wall Mount: Yellow Powder Coated

Sleeve Caps

DSC-S2 – Sleeve Cap – Powder Coated Steel

DSC-S1 – Sleeve Cap – Stainless Steel

DSC-P1 – Sleeve Cap – Plastic

Complete ArmsDescriptionWeight
DK1824Davit Mast, includes center post (CP60), elbow (EM01), and 18"/24" offset arm (BA24) (Base and hoist sold separately)45 lbs.
DK3036Davit Mast, includes center post (CP60), elbow (EM01), and 30"/36" offset arm (BA36) (Base and hoist sold separately)48 lbs.
DK4248Davit Mast, includes center post (CP60), elbow (EM01), and 42"/48" offset arm (BA48) (Base and hoist sold separately)51 lbs.
Individual PartsDescriptionWeight
BA24Offset Arm, aluminum, with pulley & U-bracket, 18"/24" offset reach7 lbs.
BA36Offset Arm, aluminum, with pulley & U-bracket, 30"/36" offset reach10 lbs.
BA48Offset Arm, aluminum, with pulley & U0-bracket, 42"/48" offset reach12 lbs.
EM01Elbow, fabricated aluminum, reversible for different offset lengths13 lbs.
CP60Center post with hoist mounting bracket, aluminum, 60" H26 lbs.
CPX-15Center post extension, powder coated steel, 15"22 lbs.
CPX-24Center post extension, powder coated steel, 24"25 lbs.
CPX-36Center post extension, powder coated steel, 36"31 lbs.
Mount SleevesDescriptionWeight
DSP-F2Coated steel, center floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSS-F2Stainless steel, center floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSP-F1Coated steel, floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSS-F1Stainless steel, floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSP-W1Coated steel - wall mounted. Can anchor to truck bumpers, tank walls, sides of catwalks, meter pits, clarifier's, etc.22 lbs.
DSS-W1Stainless steel - wall mounted. Can anchor to truck bumpers, tank walls, sides of catwalks, meter pits, clarifier's, etc.22 lbs.
DSP-A1Coated steel - inside 90° angle. The corner mount is anchored by bolts to reinforced truck bumpers, walls, etc.26 lbs.
DSP-A2Coated steel - outside 90° angle. The corner mount is anchored by bolts to reinforced truck bumpers, walls, etc.26 lbs.
DSP-C2Coated steel - cylinder core mount is drilled into existing concrete or poured into fresh concrete. Must be secured to the concrete with grout or epoxy compatible with plant conditions.9 lbs.
DSS-C2Stainless steel - cylinder core mount is drilled into existing concrete or poured into fresh concrete. Must be secured to the concrete with grout or epoxy compatible with plant conditions.9 lbs.
DSP-C1Coated steel - placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern.21 lbs.
DSS-C1Stainless steel - placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern.21 lbs.
DSP-F3Coated steel - the existing concrete flush floor mount is drilled and bolted in concrete or welded or bolted in steel. Great for high traffic areas where trip hazards are a concern.23 lbs.
DSS-F3Stainless steel - the existing concrete flush floor mount is drilled and bolted in concrete or welded or bolted in steel. Great for high traffic areas where trip hazards are a concern.23 lbs.
DSR-S03Portable Wall Mounted Base - zinc plated carbon steel. Clamping via 8 bolts, the wall mount straddles walls of tanks, caissons, shorings, etc. up to 3" thick.58 lbs.
DSR-A08Clamping Portable Wall Mounted Base - yellow powder coated. For clamping onto a wall ranging from 3" to 8" thick walls.35 lbs.
DSR-ADJAdjustable Wall Mounted Base - yellow powder coated. The adjustable wall mount can clamp to any wall ranging from 1" - 23.25" thick.55 lbs.
DSC-S2Sleeve accessory - zinc plated steel sleeve cap. Used to seal sleeves when not in use. Has a rubber seal that expands into sleeve.1 lb.
DSC-S1Sleeve accessory - stainless steel sleeve cap. Used to seal sleeves when not in use. Has a rubber seal that expands into sleeve.1 lb.
DSC-P1Sleeve accessory - ABS plastic sleeve cap. Used to seal sleeves when not in use. Has a rubber seal that expands into sleeve.0.24 lbs.
Davit Kit Manual

Download
Product Warranty

Download
DSP-C1/DSS-C1 Product Specifications

Download
DSR-S03 Product Specifications

Download
DSR-A08 Product Specifications

Download
DSP-W1/DSS-W1 Product Specifications

Download
DSP-F3/DSS-F3 Product Specifications

Download
DSP-F2/DSS-F2 Product Specifications

Download
DSP-F1/DSS-F1 Product Specifications

Download
DSP-C2/DSS-C2 Product Specifications

Download
BGDK Product Specifications

Download
CPX-15 Product Specifications

Download
DSR-ADJ Manual

Download
Hoists & SRLs
Image of the Personnel Hoist

Personnel Hoist: PH07R

70’ Technora® Rope

Image of the Personnel Hoist

Personnel Hoist: PH07C

70’ stainless steel cable

Image of a PSRL1125 Standard SRL

Standard SRL: PSRL1125-SS

25’ stainless steel cable and carabiner

Image of the 3-Way SRL

3-Way SRL: PSRL1350-SS

3/16” x 50’ stainless steel cable

Image of the Equipment Hoist

Equipment Hoist: WH07C

70’ stainless steel cable, for equipment only, maximum load 700 lbs.

Permanent Davit Accessories

DSC-P1: Sleeve Cap – Plastic

Plastic sleeve cap that is used to seal sleeves when not in use. Has a rubber seal to expand into sleeve.

DSC-S1: Sleeve Cap – Stainless Steel

Stainless steel sleeve cap that is used to seal sleeves when not in use. Has a rubber seal to expand into sleeve.

DSC-S2: Sleeve Cap – Zinc Plated Steel

Zinc plated steel sleeve cap that is used to seal sleeves when not in use. Has a rubber seal to expand into sleeve.

Image of the Standard Quick-Connect Bracket MB-PF1

Replacement MB-FSB Bracket

Bracket to attach all SRL's to MB-PF1

Image of a Hoist Carrying Case

BGW3

Carrying case which fits all hoists and SRLs

Image of the Standard Quick-Connect Bracket MB-PF1

Replacement MB-PF1 Quick-Connect Bracket

Standard quick-connect bracket for PH Series hoists, for the LifeGuard and Davit System

Adjustable Wall Mount

DSR-ADJ: Adjustable Wall Mount

Portable wall mounted plate/sleeve, adjustable, powder coated steel, 24”

Clamping Portable Wall Mount

DSR-A08: Clamping Portable Wall Mount

Portable wall mounted plate/sleeve, aluminum

Portable Wall Mount

DSR-S03: Portable Wall Mount

Portable wall mounted plate/sleeve, powder coated steel, max. 3”

Concrete Floor Flush Mounted Permanent Base

DSS-F3: Flush Floor Mounted – Existing Concrete

Flush floor mount sleeve for existing concrete, stainless steel

Concrete Floor Flush Mounted Permanent Base

DSP-F3: Flush Floor Mounted – Existing Concrete

Flush floor mount sleeve for existing concrete, powder coated steel

Flush Floor Mounted Permanent Base

DSS-C1: Flush Floor Mounted – Fresh Pour Concrete

Flush floor mount sleeve for freshly poured concrete, stainless steel

Flush Floor Mounted Permanent Base

DSP-C1: Flush Floor Mounted – Fresh Pour Concrete

Flush floor mount sleeve for freshly poured concrete, powder coated steel

Cylinder Core Permanent Base

DSS-C2: Cylinder Core

Cylinder core, stainless steel

Cylinder Core Permanent Base

DSP-C2: Cylinder Core

Cylinder core, powder coated steel

Inside Corner Mounted Permanent Base

DSP-A1: Inside Corner Mounted

Wall mounted plate/sleeve, 90 degree inside mount, powder coated steel

Outside Corner Mounted Permanent Base

DSP-A2: Outside Corner Mounted

Wall mounted plate/sleeve, 90 degree inside mount, powder coated steel

Wall Mounted Permanent Base

DSS-W1: Wall Mounted

Wall mounted plate/sleeve, stainless steel

Wall Mounted Permanent Base

DSP-W1: Wall Mounted

Wall mounted plate/sleeve, powder coated steel

Floor Mounted Permanent Base

DSS-F1: Floor Mounted

Floor mounted base plate/sleeve, stainless steel

Floor Mounted Permanent Base

DSP-F1: Floor Mounted

Floor mounted base plate/sleeve, powdered coated steel

Center Floor Mounted Sleeve

DSS-F2: Center Floor Mounted

Floor mounted center base plate/sleeve, stainless steel

Center Floor Mounted Sleeve

DSP-F2: Center Floor Mounted

Floor mounted center base plate/sleeve, powder coated steel

Image of the CPX-24 Center Post

CPX-36

Center post extension, powder coated steel, 36”

Image of the CPX-24 Center Post

CPX-24

Center post extension, powder coated steel, 24”

Image of the CPX-24 Center Post

CPX-15

Center post extension, powder coated steel, 15”

Image of the Davit Offset Arm

BA48

Offset Arm, aluminum, with pulley & U-bracket, 42”/48” offset reach

Image of the Davit Offset Arm

BA36

Offset Arm, aluminum, with pulley & U-bracket, 30”/36” offset reach

Image of the Davit Carrying Case

BGDK

Carrying case and storage, BK Series Davit Kit, center post, elbow and arm

Image of the Davit Center Post

CP60

Center post with hoist mounting bracket, aluminum, 60” H.

Image of the Davit Elbow

EM01

Elbow, fabricated aluminum, reversible for different offset lengths

Image of the Davit Offset Arm

BA24

Offset Arm, aluminum, with pulley & U-bracket, 18”/24” offset reach

Safety Accessories
Image of a Hoist Carrying Case

BGW3

Carrying case which fits all hoists and SRLs

Image of a safety harness

Safety Harness: Adjustable Medium to Large

Adjustable Medium to Large Harness, Class III

Image of a safety harness

Safety Harness: Large

Utility Full Body Harness, large, Class III

Image of a safety harness

Safety Harness: Medium

Utility Full Body Harness, medium, Class III

Image of a safety harness

Safety Harness: Small

Utility Full Body Harness, small, Class III

Got everything you're interested in?   Finalize Quote

Related Products