Permanent Davit Sleeves & Bases

Permanent mount sleeves provide a greater offset reach and allow a 360° pivot. They can be anchored by bolts or welded to a variety of surfaces.

Like what you see? Contact us at 1-800-525-8460 or [email protected]

Category:
ModelDescriptionWeight
DSP-F2Coated steel, center floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSS-F2Stainless steel, center floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSP-F1Coated steel, floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSS-F1Stainless steel, floor mount - can anchor to surfaces such as floors, truck beds, catwalks, etc.24 lbs.
DSP-W1Coated steel - wall mounted. Can anchor to truck bumpers, tank walls, sides of catwalks, meter pits, clarifier's, etc.22 lbs.
DSS-W1Stainless steel - wall mounted. Can anchor to truck bumpers, tank walls, sides of catwalks, meter pits, clarifier's, etc.22 lbs.
DSP-A1Coated steel - outside 90° angle. The corner mount is anchored by bolts to reinforced truck bumpers, walls, etc.26 lbs.
DSP-A2Coated steel - inside 90° angle. The corner mount is anchored by bolts to reinforced truck bumpers, walls, etc.26 lbs.
DSP-C2Coated steel - cylinder core mount is drilled into existing concrete or poured into fresh concrete. Must be secured to the concrete with grout or epoxy compatible with plant conditions.9 lbs.
DSS-C2Stainless steel - cylinder core mount is drilled into existing concrete or poured into fresh concrete. Must be secured to the concrete with grout or epoxy compatible with plant conditions.9 lbs.
DSP-C1Coated steel - placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern.21 lbs.
DSS-C1Stainless steel - placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern.21 lbs.
DSP-F3Coated steel - the existing concrete flush floor mount is drilled and bolted in concrete or welded or bolted in steel. Great for high traffic areas where trip hazards are a concern.23 lbs.
DSS-F3Stainless steel - placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern.23 lbs.
DSR-S03Portable Wall Mounted Base - zinc plated carbon steel. Clamping via 8 bolts, the wall mount straddles walls of tanks, caissons, shorings, etc. up to 3" thick.58 lbs.
DSR-A08Portable Wall Mounted Base - yellow powder coated. For clamping onto a wall ranging from 3" to 8" thick walls.35 lbs.
DSR-ADJPortable Wall Mounted Base - yellow powder coated. The adjustable wall mount can clamp to any wall ranging from 1" to 23-1/4" thick.55 lbs.
DSC-S2Sleeve accessory - zinc plated steel sleeve cap. Used to seal sleeves when not in use. Has a rubber seal that expands into sleeve.1 lbs.
DSC-S1Sleeve accessory - stainless steel sleeve cap. Used to seal sleeves when not in use. Has a rubber seal that expands into sleeve.1 lbs.
DSC-P1Sleeve accessory - ABS plastic sleeve cap. Used to seal sleeves when not in use. Has a rubber seal that expands into sleeve..24 lbs.

Davit-Permanent-Sleeves_Catalog