Duct Rodders

Small Duct Rodder

Developed for 1” or 2” (2.5 or 5 cm.) conduit and up to 400’ (122 m.). The Mini rodder combines lightweight and portability along with high rod strength. Pulling strength is rated at 2200 lbs. (998 kg.) while 12” to 18” (30 to 45 cm.) radius bends are easily negotiated. Especially effective for placement of wire or cable in interior building conduit.

Medium Duct Rodder

Developed for 2” or 3” (5 or 7.6 cm.) conduit and up to 1000’ (305m.). The Midi rodder combines mid-range lengths with high flexibility. Pulling strength is rated at 2800 lbs. (1270 kg.) while 18” to 24” (45 to 61 cm.) radius bends are easily negotiated. Especially effective in pulling electric cable, hoist rope, and midrange lengths of telecommunications cabling.

Large Duct Rodder

Developed for 3” (7.6 cm.) or larger conduit and up to 1200’ (366 m.). The Maxi rodder combines long range lengths with high superior strength. Pulling strength is rated at 3300 lbs. (1496 kg.) while 24” to 30” (61 cm. to 76 cm.) radius bends are easily negotiated. Especially effective in pulling heavy electrical and telecommunications cable in long runs. This is a domestic rod not containing the same fiber ratio as other sizes.

Like what you see? Contact us at 1-800-525-8460 or [email protected]

Category:
Small Duct Rodders
ModelLengthWeight
46100100' (30.5 m.)16 lb. (7.3 kg.)
46200200' (61 m.)19 lb. (8.6 kg.)
46300300' (91.5 m.)22 lb. (10 kg.)
46400400' (122 m.)25 lb. (11.3 kg.)

 

 

Medium Duct Rodders
ModelLengthWeight
48200M200' (60m.)70 lb. (31.7 kg.)
48400M400' (120 m.)85 lb. (38.6 kg.)
48600M600' (183 m.)100 lb. (45.3 kg.)
48800M800' (244 m.)120 lb. (54.4 kg.)
481000M1000' (305 m.)135 lb. (61.2 kg.)

 

 

Large Duct Rodders
ModelLengthWeight
49400M400’ (122 m.)102 lb. (46.2 kg.)
49600M600’ (183 m.)120 lb. (54.4 kg.)
49800M800’ (244 m.)138 lb. (62.6 kg.)
491000M1000’ (305 m.)157 lb. (71.2 kg.)
491200M1200’ (366 m.)170 lb. (77.1 kg.)

 

 

Accessories
ProductDescription
End Fitting SolidUtilized on rod attached to spool. Provides greater side loading capacity when rod is being reeled off.
Union CouplingFor joining two rodding units together outside the duct. Requires each rodder to be equipped with a swivel.
Basket CombinationFor joining two rods together inside the duct. The Minimum duct diameter requirement is 4".
End Fitting SwivelUtilized on leading end of the rod, the swivel end fitting allows line being pulled in, to twist and unwind.
ShackleCombines with pulling eye, for use when the hoist line has a closed loop eye. Also used to connect to another rod with a shackle.
Roller GuidePrevents end hang ups. Guides the rod over bumps, offsets, and around corners.
Pulling EyeEye is used to tie off hoist line, mule tape, or electrical conductors. Also utilized when shackle is required.
In-line Repair KitDesigned to repair damage inline on the rod.
INCLUDES: Instructions, adhesive, sand paper, and both the swivel as well as the
solid rod end.
End Repair KitDesigned to repair damage at the end of the rod.
INCLUDES: Instructions, adhesive, sand paper, and both the swivel as well as the solid rod end.

Duct Rodders in Catalog