1/4″ rod diameter. For 1″ or 2″ conduit and up to 400′.
Mini Duct Rodder
Developed for 1” or 2” (2.5 or 5 cm.) conduit and up to 400’ (122 m.). The MINI rodder combines light weight and portability along with high rod strength. Pulling strength is rated at 2200 lbs. (998 kg.) while 12” to 18” (30 to 45 cm.) radius bends are easily negotiated. Especially effective for placement of wire or cable in interior building conduit.
Choose model then select accessories to include them into your quote
|46100||1/4" x 100'||16 lb. (7.3 kg.)|
|46200||1/4" x 200'||19 lb. (8.6 kg.)|
|46300||1/4" x 300'||22 lb. (10 kg.)|
|46400||1/4" x 400'||25 lb. (11.3 kg.)|
Mini Duct Rodder Accessories
Mini Rodder: Shackle
Combines with pulling eye, for use when the hoist line has a closed loop eye. Also used to connect to another rod with a shackle.
Mini Rodder: Roller Guide
Prevents end hang ups. Guides the rod over bumps, offsets, and around corners.
Mini Rodder: End Fitting Solid
Utilized on rod attached to spool. Provides greater side-loading capacity when rod is being reeled off.
Mini Rodder: Union Coupling
For joining two rodding units together outside the duct. Requires each rodder to be equipped with a swivel.
Mini Rodder: End Fitting Swivel
Utilized on leading end of the rod, the swivel end fitting allows line being pulled in to twist and unwind.
Mini Rodder: Pulling Eye
Eye is used to tie off hoist line, mule tape, or electrical conductors. Also utilized when shackle is required.
Mini Rodder: In-Line Repair Kit
Designed to repair damage inline on the rod. Includes: Instructions, adhesive, sand paper, and union coupler
Mini Rodder: End Repair Kit
Designed to repair damage at the end of the rod. Includes: Instructions, adhesive, sand paper, and both the swivel as well as the solid rod end.