Home / Products / fiber splicing truck insert
Fiber Splicing Truck Insert
Fiber Splicing Truck Insert
Overview
Fiber Splicing Capabilities Right On Your Truck
The Pelsue Truck Insert is a compact and cost-effective way to get fiber splicing capabilities from your truck. The Truck Insert includes a full-length countertop, LED lighting, a 15,000 BTU/hr Coleman Ultra Low Profile air conditioner, and cabinets and drawers for storage, as well as three GFI protected 120VAC outlets.
Compact Design
The Pelsue Truck Insert is a great option for fiber splicing in tight spaces or off-road areas. It can take you wherever your truck can go. The body will outlast the life of the chassis, and can then be moved to a new chassis, providing considerable cost savings. Works with 3/4 ton trucks with an 8-foot bed.
Cost-Effective Solution
If you have the vehicle to take you where you need to go, the Pelsue Fiber Splicing Truck Insert is your answer to cost-effective, long-lasting fiber splicing capabilities. The Insert is built to outlast the life of your chassis, so it can easily be switched to a new chassis, providing considerable cost savings. The Truck Insert is unique in the fact that it can go wherever your truck can go—so when you need to reach tight, difficult-to-access locations, it is extremely effective.
Some of the standard features included in the Truck Insert are:
Standard Features:
Body
Requires a minimum 3/4-ton full size pickup truck with an 8-foot bed
Self-contained truck-mounted insert, bolts in place through truck bed
Fiberglass gel coat body with a 72” interior height, with open storage area over cab
Finished weight of base unit with standard features is ~1,200 pounds
Slider window with screens, one each on both sides of body
Single fixed bulkhead window
Single rear entry door with fixed window. Hinged on streetside, opens to curbside.
Fully insulated interior walls and ceiling
Cable entry port at rear of body adjacent to entry door
Marker and clearance lights per FMVSS
Curbside overhead storage cabinet with doors
Curbside solid counter top, black laminate
Two storage cabinets and two drawer modules under countertop on curb side
Electrical, Lighting & Climate
Control panel with circuit breakers and 60 amp, 120 VAC input to 12 VDC output
Three interior duplex receptacles, 120 VAC, 20 Amp, GFI protected, along counter top, one receptacle includes a USB power port
Three 12 VDC LED lights mounted above curb side countertop
One exterior duplex weatherproof receptacle, 120 VAC, 20 amp, GFI protected on rear exterior wall
Commercial grade air conditioner, roof-mounted
Shore power inlet, 120 VAC, 30 amp, 1 pole, 3 wire, twist-lock
Carbon monoxide monitor, 120 VAC, plug in dedicated GFI outlet
Fire extinguisher, 2 lb, disposable, DOT approved