Fall Protection

Expandable Fall Arrest Post

A standalone fall arrest system that expands from 7′ to 11′ using a simple pin attachment — no additional accessories required to raise or lower the height. Single-person tie-off, man-rated to 310 lbs., compatible with 6 base plates option.

Model
TFAT-11A

Telescopic post, single person tie-off, aluminum, 7’-11’ H

Expandable_Fall_Arrest_Post
Pin Attachment · No Accessories Needed

Higher Reach.
Same Simple Setup.

When your mounting location requires an anchor point above the standard 6-foot post height, the Expandable Fall Arrest Post raises from 7 to 11 feet with a straightforward pin attachment — no additional hardware, no extension kits, nothing else to order. It's a standalone system that gives you the extra reach when the job demands it.

Telescopic aluminum post — adjusts 7′ to 11′ via pin attachment
Telescopic aluminum post — adjusts 7′ to 11′ via pin attachment
No additional accessories needed to expand height
No additional accessories needed to expand height
Standalone system — everything required is included in the post
Standalone system — everything required is included in the post
Single-person tie-off, man-rated to 310 lbs.
Single-person tie-off, man-rated to 310 lbs.
Compatible with 6 base plate options
Base plates required — sold separately for all configurations
Base plates required — sold separately for all configurations
OSHA compliant · Made in USA
OSHA compliant · Made in USA
Choosing the Right Post

Expandable vs Uni-Lite

Both are fall arrest posts from Pelsue — the right choice depends on anchor height, number of workers, and whether you need the flex absorption of carbon fiber.

Expandable Post - TFAT-11A

TFAT-11A
Specs
Height
7′ to 11′ adjustable
Material
Aluminum
Capacity
310 lb man-rated
Tie-Off
1 person
Height Adjust
Pin attachment — no extras needed
Weight
75 lbs.
Base Options
6 compatible bases
Best For
Higher anchor points, single worker, simple adjustment

Uni-Lite Post - FT-C70

FT-C70
Specs
Height
6′ fixed (5.8′ anchor points)
Material
Carbon fiber
Capacity
up to 930 lb - 310 lbs per person
Tie-Off
Up to 3 persons
Height Adjust
TFAT-14C accessory (10′–14′)
Weight
39 lbs.
Base Options
17 compatible bases
Best For
Multi-worker sites, lighter carry, patented flex design
Compatible Equipment

Accessories That Complete the System

Compatible SRL and gear — sold separately to complete your fall protection configuration.
PHQR_BAG2

BGW3 - SRL & Hoist Bag

Carrying case which fits all hoists and SRLs

6 Base Options

Compatible Base Plates

The TFAT-11A is compatible with the following weld-on, bolt-on, and beam clamp base plates. Base plates are required and sold separately.

Weld-On & Bolt-On Base Plates

Model
Description
FB-SW1
Weld-on base plate · 12 lbs.
FB-SW3
Weld-on base plate with tie-off anchor · 12 lbs
FB-SB3
Bolt-on base plate with tie-off anchor · 16.5 lbs.
FB-RB1
Round base plate for stud weld · 16 lbs.
FB-RW1
Weld-on base plate with 12" round mounting ears · 16 lbs.
FB-SW1-00

Beam Clamp

Model
Description
BC-16S
Beam clamp — adjustable 8.75"–16" for I-Beam · 40 lbs.
BC-14S-16S-02

Have a Question?
Talk to a Confined Space Partner