Industrial Safety

All-Weather Tents

Three tents built around the same design principle — solar-blocking top, translucent sides, natural light in, solar heat out — deployed across three completely different work scenarios: 8×8 splicing station, compact pedestal wrap, and five-position aerial mount.
Jump to a category below:

All-Weather Tents Key Features

Solar-Blocking Top

Solar-Blocking Top

200D polyester top blocks solar gain and UV overhead — keeps the tent significantly cooler than standard work tents on sunny days.

Translucent Sides — Light In

Translucent Sides — Light In

250D polyester sides allow natural light through while blocking wind and weather. No generator needed for ambient illumination in most conditions.

All-Season Weather Protection

All-Season Weather Protection

All-Season Weather Protection
Urethane-coated, waterproof, UV protected, mildew resistant, and flame resistant (CPAI-84 & NFPA 701) — built to work year-round in any conditions.

All-Weather Fiber Splicing Tent

6508DRAD-FS

Ground splicing station for all seasons — solar-blocking top, translucent sides, three 14″ sleeves for vent hoses, splice cases, or AC. 30″ rear door, interlocking vehicle flaps. One model, one size.

3 × 14″ cable/vent sleeves
3 × 14″ cable/vent sleeves
30" rear door
30" rear door
Interlocking flaps
Interlocking flaps
Solar blocking top
Solar blocking top
View Product
All-Weather

All-Weather Fiber to the Home (FTTH) Tent

6705

Narrows to 2′ wide for restricted pedestals and closures, expands to 6×6. Velcro panels seal around obstacles — no gaps. Solar-blocking top, translucent sides. Works as FTTH tent, manhole cover, or compact work tent.

Narrows to 2'
Narrows to 2'
Velcro pedestal wrap
Velcro pedestal wrap
Solar-block top
Solar-block top
17 lbs
17 lbs
View Product
fiber-to-the-home-work-tent

All-Weather Multi-Tent

6334A · 6334AP · 6334AN

Five mounting positions from one tent body — strand, bucket truck, ladder, pole, or manhole guard. Solar-blocking ceiling, roll-up sides, 8′ height. Strand hardware included; all other hardware sold separately.

5-in-1 Tent
5-in-1 Tent
Strand hardware included
Strand hardware included
Solar-block ceiling
Solar-block ceiling
Sizes: 3.6'×3.6' or 5'×5'
Sizes: 3.6'×3.6' or 5'×5'
View Product
All-Weather-Multi-Tent

All-Weather Multi-Tent - Hardware Guide

The tent body is the same for all five positions. Select where you're mounting to find the correct hardware and whether it's included or ordered separately.

Strand Mount

63350 — Strand Hardware
✓ Hardware Included

Attaches the tent to a standard aerial strand for overhead splice work. Strand hardware (model 63350) is included with all standard Multi-Tent models — the 6334A, 6334AP, and 6334AN all ship with strand hardware.
No additional purchase required for strand use.

Bucket Truck Mount

63360 (6334A) · 63360AN (6334AN)
Sold Separately

Attaches the tent to an aerial lift bucket for elevated work from a boom truck. Bucket hardware sold separately — model 63360 for standard 6334A/6334AP, model 63360AN for the larger 6334AN (5×5).

 

Ladder Mount

63360 (6334A) · 63360AN (6334AN)
Sold Separately

Hangs from a ladder for access cabinet work or aerial closures reached by ladder. Ladder hardware is the same part as pole hardware — model 63380 for standard 6334A/6334AP, model 63380AN for the larger 6334AN.

Pole Mount

63360 (6334A) · 63360AN (6334AN)
Sold Separately

Attaches to a utility pole for overhead cabinet or enclosure work. Pole hardware is shared with the ladder configuration — model 63380 for standard 6334A/6334AP, model 63380AN for the larger 6334AN.

Manhole Guard Mount

63390 — Manhole Guard Hardware
Sold Separately

Clamps directly to a Pelsue manhole guard (model 4000A or 4000AL) for weather protection over an open manhole. Manhole guard hardware sold separately — model 63390 for standard 6334A/6334AP. Note: manhole guard sold separately from manhole equipment page.

All-Weather Tents Comparison

Feature
All-Weather Splicing Tent
Fiber To The Home (FTTH) Tent
Multi-Tent
Model number
6508DRAD-FS
6705
6334A / AP / AN
Height
6.5′
7′
8′
Weight
32 lbs
17 lbs
11 lbs
Solar-blocking top
comptab-yes-icon
comptab-yes-icon
✓ Ceiling
Translucent sides
comptab-yes-icon
comptab-yes-icon
✓ Roll-up
Cable / vent sleeves
✓ Three 14″
comptab-no-icon
comptab-no-icon
Rear access door
✓ 30″ roll-up
— (tent flaps)
comptab-no-icon
Interlocking / vehicle attachment
comptab-yes-icon
comptab-no-icon
comptab-no-icon
Adjustable width
comptab-no-icon
✓ 2′ – 6′
comptab-no-icon
Pole/structure wrap
comptab-no-icon
✓ Velcro
comptab-no-icon
Mounting positions
Ground only
Ground only
5 positions
AC compatible
✓ (via sleeves)
comptab-no-icon
comptab-no-icon
Best for
Ground splicing stations, HVAC use
FTTH pedestals, restricted spaces
Aerial work, overhead enclosures

Shared Construction — All Three Tents

What All-Weather Tents Share

Fabric

  • 200D polyester top (solar-blocking)
  • 250D polyester sides (translucent)
  • Urethane coated
  • Water resistant
  • Mildew resistant
  • UV protected
  • Flame resistant (CPAI-84 & NFPA 701)

Frame

  • Cast aluminum hubs (standard models)
  • Plastic hubs (6334AP- non-conductive)
  • Pultruded fiberglass rods
  • Heavy-duty frame construction

Construction & Origin

  • Double-stitched binding
  • Exposed roof seams sealed
  • Non-metallic snaps & rings
  • Sewn in our facility in Colorado, USA
  • Carrying case included with all models

Customization Options - Built to Your Specs

Pelsue tents can be customized with color, accessory doors, and ventilation options. Top and bottom fabric can be ordered in any combination of available colors — contact us for the current color chart. Fabric specifications may vary slightly by color due to different mill runs.

Available on Most Models — Call to Confirm

Custom Colors

Top and bottom fabric in any combination of available colors. Useful for company branding, crew identification, or high-visibility jobsite requirements.

Ventilation Sleeve

Add an 8″ ventilation hose entry sleeve to the rear of the tent — allows ventilators to run without opening a door. Available on Standard and High-Rise series where not already included

Half-Moon Rear Door

Add a half-moon rear access door to Standard or Interlocking series tents where easier egress is needed when the front is closed off.

Choose the Right All-Weather Tent

All three tents share the same All-Weather design. The right one depends on where you're working and how the tent needs to attach.
1

Is the work aerial or ground-based?

Aerial strand, bucket, ladder, or pole → Multi-Tent (6334A/AP/APC/AN). Ground → Splicing or FTTH.

2

Ground work: open space or tight access point?

Open manhole or large splice area → Splicing Tent (8×8, three 14″ sleeves). Pedestal or restricted space → FTTH Tent (narrows to 2′).

4

Climate control needed?

Yes → All-Weather Splicing Tent — three 14″ sleeves for a portable AC, HVAC, or ventilation hoses.

Ready to Order Your All-Weather Tent?