Industrial Safety

General Work Tents

Four series, one-piece construction, and a setup time measured in seconds — not minutes. Each series adds capability from the last: Standard for the basics, Interlocking to link tents together, Dual-Entry for rear access, High-Rise for clearance over equipment.
Jump to a category below:

Which series do you need?

Standard Series

Standard Series

Dual zipper door

The go-to work tent — lightweight, rapid setup, one-piece. For jobs where straightforward weather protection is all you need.

Jump to Series
Interlocking Series

Interlocking Series

Links to vehicle or tent

All the Standard features plus interlocking flaps — connect two tents or attach directly to a work vehicle. Includes 8″ vent sleeve.

Jump to Series
Dual-Entry Series

Dual-Entry Series

Front + rear access

Interlocking Series plus a 30″ rear roll-up access door. Ideal for cabinet work or when the front is attached to a vehicle.

Jump to Series
High-Rise Series

High-Rise Series

8-9' interior height

Extra height for work over tripod or davit systems, or tall pole-mounted cabinets. Half-moon rear door and exterior buckles for poles.

Jump to Series

Standard Series

The go-to work tent — one-piece pop-up construction, dual zipper roll-up door, five sizes from 4×4 to 14×14. No special connectivity needed.

Dual zipper door
Dual zipper door
Ground flaps
Ground flaps
Deployed in < 1 min
Deployed in < 1 min
Sizes: 4'×4' to 14'×14'
Sizes: 4'×4' to 14'×14'
View Product
Standard-Series

Interlocking Series

Standard Series plus interlocking flaps — connect two tents end-to-end or attach directly to a work vehicle. Includes an 8″ side vent sleeve. Sizes from 6×6 to 12×12, plus a 10×10 at 9′ height.

Interlocking flaps + D-rings
Interlocking flaps + D-rings
8″ side vent sleeve
8″ side vent sleeve
Vehicle attachment
Vehicle attachment
Sizes: 6'×6' to 12'×12'
Sizes: 6'×6' to 12'×12'
View Product
Interlocking-Series

Dual-Entry Series

Interlocking Series plus a 30″ rear roll-up door — enter from the back when the front is sealed against a vehicle or cabinet. Includes 28″ rear cable slot and 8″ side vent sleeve.

30″ rear roll-up door
30″ rear roll-up door
28″ rear cable slot
28″ rear cable slot
Interlocking flaps
Interlocking flaps
Sizes: 8'×8' and 10'×10'
Sizes: 8'×8' and 10'×10'
View Product
Dual-Entry-Tents

High-Rise Series

2 models

Extra height for work over tripod or davit systems, or tall pole-mounted cabinets. Velcro front door wraps around poles, half-moon rear door, exterior buckles, 8″ rear vent sleeves.

8–9′ interior height
8–9′ interior height
Half-moon rear door
Half-moon rear door
8″ rear vent sleeves
8″ rear vent sleeves
Pole/structure wrap
Pole/structure wrap
Sizes: 6'×6' and 8'×8'
Sizes: 6'×6' and 8'×8'
View Product
high-rise-series-work-tents

General Work Tents Comparison

Feature
Standard
Interlocking
Dual-Entry
High-Rise
Sizes available
4'x4' - 14'x14'
6'x6' - 12'x12'
8'x8' and 10'x10'
6'x6' and 8'x8'
Interior height
6' - 7'
6' - 9'
6.5'
8' - 9'
Roll-up front door
✓ Dual zipper
✓ Dual zipper
✓ Roll-up flaps
✓ Velcro wrap
Rear access door
— (optional add-on)
— (optional add-on)
✓ 30″ roll-up
✓ Half-moon
Interlocking flaps
comptab-no-icon
comptab-yes-icon
comptab-yes-icon
comptab-no-icon
Attaches to vehicle
comptab-no-icon
comptab-yes-icon
comptab-yes-icon
comptab-no-icon
Vent sleeve
— (optional add-on)
✓ 8″ side
✓ 8″ side
✓ 8″ rear
Cable slot
comptab-no-icon
comptab-no-icon
✓ 28″ rear
comptab-no-icon
Pole/structure wrap
comptab-no-icon
comptab-no-icon
comptab-no-icon
✓ Velcro + buckles
Weight range
18 – 162 lbs
21 - 94 lbs
32 - 36 lbs
28 - 43 lbs
Screens & flaps
✓ 2 windows
✓ 2 windows
✓ 2 windows
✓ 2 windows

Fabric & Frame Specifications

What All General Work Tents Share

Fabric

  • 250 denier polyester
  • Urethane coated
  • Water resistant
  • Mildew resistant
  • UV protected
  • Flame retardant (CPAI-84 & NFPA 701)

Frame

  • Cast aluminum hubs
  • Pultruded fiberglass rods
  • Heavy-duty frame construction
  • One-piece — no loose parts

Construction & Origin

  • Double-stitched binding
  • Exposed roof seams sealed
  • Non-metallic snaps & rings
  • Standard color: yellow bottom/white top
  • Sewn in our facility in Colorado, USA

Customization Options - Built to Your Specs

Pelsue tents can be customized with color, accessory doors, and ventilation options. Top and bottom fabric can be ordered in any combination of available colors — contact us for the current color chart. Fabric specifications may vary slightly by color due to different mill runs.

Available on Most Models — Call to Confirm

Custom Colors

Top and bottom fabric in any combination of available colors. Useful for company branding, crew identification, or high-visibility jobsite requirements.

Ventilation Sleeve

Add an 8″ ventilation hose entry sleeve to the rear of the tent — allows ventilators to run without opening a door. Available on Standard and High-Rise series where not already included

Half-Moon Rear Door

Add a half-moon rear access door to Standard or Interlocking series tents where easier egress is needed when the front is closed off.

Find the Right Tent for Your Application

Pick Your Series in Four Questions

The right series is determined by how you work, not just how big the opening is. Answer these four questions and the right model will be clear — or call us and we'll narrow it down quickly.
1

Do you need to link tents or attach to a vehicle?

No → Standard Series.
Yes → Interlocking or Dual-Entry.

2

Do you need rear access when the front is sealed?

Yes → Dual-Entry.
No and working near a cabinet? Interlocking works fine.

4

Is the clearance height under 7′ an issue?

Over tripod, davit, or tall pole cabinet? → High-Rise Series. 8′ or 9′ available.

3

What footprint do you need?

Match tent size to your work area. Smaller sizes deploy faster. Larger sizes accommodate more crew or equipment.

Ready to Order Your Work Tents?

Get a quote on any model — standard or custom color, with vent sleeve, rear door, or other options — confirmed for your series and application before order.