Fall Protection

Quick Rescue Hoists

When a worker needs rescue and isn't already hooked in, seconds are the difference. The Quick Rescue Hoists' line is not permanently affixed to the drum — letting you clip the line to a fallen worker via the Rescue Pole from outside the space, run it over the pulley, and retrieve immediately. 310 lb man-rated. OSHA & ANSI Compliant. Made in USA.

23′/min Retrieval
23′/min Retrieval
5.5:1 Gear Ratio
5.5:1 Gear Ratio
310 lb Capacity
310 lb Capacity
22 lbs. Weight
22 lbs. Weight
Connect with a Safety Partner
quick_rescue_hoist

All Models

Model
Winding
Rope
Hook
Weight
PHQR
Standard
None - hoist only
comptab-no-icon
22 lbs.
PHQR-T45
Standard
45′ Technora®
ANSI Z359 swivel snap hook
22 lbs.
PHQR-X45
Standard
45′ Technora®
Wichard hook
22 lbs.
PHQR-T70
Standard
70′ Technora®
ANSI Z359 swivel snap hook
22 lbs.
PHQRR
Reverse
None - hoist only
comptab-no-icon
22 lbs.
PHQRR-T45
Reverse
45′ Technora®
ANSI Z359 swivel snap hook
22lbs.
PHQRR-X45
Reverse
45′ Technora®
Wichard hook
22 lbs.
PHQRR-T70
Reverse
70′ Technora®
ANSI Z359 swivel snap hook
22lbs.

All  hoists share the following specifications:

Gear Ratio: 5.5:1 - Single speed drive
Gear Ratio: 5.5:1 - Single speed drive
Braking: Dual - Friction + overspeed
Braking: Dual - Friction + overspeed
Retrieval Rate: 23′/min
Retrieval Rate: 23′/min
The Key Innovation

The Line Is Not Permanently Attached

Standard personnel hoists have their line fixed to the drum. In a true emergency — when a worker is incapacitated and not already hooked in — that setup forces rescuers into the space before retrieval can begin. The  Quick Rescue Hoist solves this. Because the line is not permanently affixed, the rescue team can use the Pelsue Rescue Pole to clip the line to the endangered worker from outside the confined space, run it over the pulley, attach it to the hoist, and retrieve immediately.

Line not permanently affixed to drum — enables outside-space retrieval
Line not permanently affixed to drum — enables outside-space retrieval
Works with the Pelsue Rescue Pole for zero-entry emergency rescue
Works with the Pelsue Rescue Pole for zero-entry emergency rescue
Available with or without rope — bring your own or select a pre-rigged configuration
Available with or without rope — bring your own or select a pre-rigged configuration
Standard and reverse winding options for left- or right-hand operation preferences
Standard and reverse winding options for left- or right-hand operation preferences
Emergency Rescue Sequence

How the Quick Rescue Hoist Works

For use when a worker is not already hooked into a hoist or SRL.

1

Clip the Line

Use the Pelsue Rescue Pole to reach the free end of the PHQR line and clip it to the fallen or endangered worker — without entering the confined space.

2

Run Over the Pulley

Feed the line over the davit or tripod pulley. Because the line is free from the drum, this step is fast and does not require pre-rigging inside the space.

3

Attach & Retrieve

Attach the line to the hoist drum and begin retrieval. The 5.5:1 gear ratio delivers 23′/min retrieval — fast enough when every second counts.

Have a Question?
Connect with a Safety Partner